PLEASE NOTE! Drawings in this manual are for illustration purposes
only and in some details may differ from the actual product.
2. Usage safety
ATTENTION! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury or
even death.
The terms "device" or "product" are used in the warnings and instructions to refer to
the:
Petrol wood chipper.
2.1.
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace
may lead to accidents. Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive environment, for example in
the presence of flammable liquids, gases or dust. The device generates sparks
which may ignite dust or fumes.
c)
If you discover damage or irregular operation, immediately switch the device
off and report it to a supervisor without delay.
d)
If there are any doubts as to the correct operation of the device, contact the
manufacturer's support service.
e)
Only the manufacturer's service point may repair the device. Do not attempt
any repairs independently!
f)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one
intended for use on live electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to enter a work station. (A
distraction may result in loss of control over the device).
h)
The device produces dust and debris during operation. It is important to
protect bystanders from their harmful effects.
i)
Use the EMERGENCY STOP if there is a risk of injury or death, accident or
damage.
j)
Regularly inspect the condition of the safety labels. If the labels are illegible,
they must be replaced.
Safety in the workplace
EN