Scheppach DS920 Originalbetriebsanleitung Seite 22

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we wish you much pleasure and success in working
with your new device.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your device and to use it for its intended purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
22 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description and scope of
delivery
Device description (Fig. 1)
The device description refers to the illustrations at the
beginning of this operating manual.
1. Gripping surface
2. Main handle
3. On/off switch
4. Connection pipe with union nut
5. Mains cable
6. Setting wheel for speed preselection
7. Ventilation openings
8. Flexible grinding head
9. Grinding plate
10. Brush edge
11. Vacuum hose
12. Hose adapter
13. Sanding sheet
14. LED light
15. Split pin
Scope of delivery (Fig. 1)
1 Drywall grinder
1 Vacuum hose (11)
2 Hose adapters (12)
6 Sanding sheets (13) (various grains)
1 Split pin (15)
3. Before commissioning
Unpacking
1. Open the packaging and carefully remove the
electric tool.
2. Remove the packaging material and packaging /
and transport safety devices (if present).
3. Check whether the scope of delivery is complete
and check the electric tool and accessory parts
for transport damage.
Note: Do not operate the electric tool if parts are miss-
ing or it is damaged. In this case, contact the dealer
you purchased the electric tool from.
4. If possible, keep the packaging until the expiry of
the warranty period. Please subsequently dispose
of the packaging in an environmentally friendly
way by recycling it.
www.scheppach.com