Scheppach SM150L Originalbetriebsanleitung Seite 29

• These statements are only valid for rechargeable
batteries and primary batteries sold in the countries
of the European Union and subject to the Europe-
an Directive 2006/66/EC. In countries outside the
European Union, different regulations may apply to
the disposal of rechargeable batteries and primary
batteries.
13. Troubleshooting
Problem Possible cause
Engine, cable or connector
Engine does not run.
defective, fuses burnt.
The engine starts
slowly and does not Voltage too low, coils dam-
reach the operating aged, capacitor burnt.
speed.
Engine producing Coils damaged, motor defec-
excessive noise. tive.
Circuits in the network are
Engine does not
overloaded (lamps, other
reach full power.
engines, etc.)
Motor overheats Overloading of the engine, in-
easily. sufficient cooling of the engine.
Remedy
Have the machine checked by a specialist. Never
repair the engine yourself. Attention! Check the fuses
and replace them if necessary.
Have the power supply company check the voltage.
Have the engine checked by a specialist. Have the
capacitor replaced by a specialist.
Have the engine checked by a specialist.
Do not use any other devices or engines on the same
circuit.
Avoid overloading the engine during grinding and
remove dust from the engine to ensure optimum engine
cooling.
www.scheppach.com GB | 29