UNIPRODO VANDER PRO Bedienungsanleitung Seite 98

EN
How to adjust the seam width
Overedge seam width can be achieved by repositioning the needle position and also
with the width adjustment knob.
Width Adjustment by Changing
Needle Position
Overedge seam width can be
adjusted by changing the needle
position
A When only left needle is used
5.7mm
B When only right needle is use
3.5mm
Width Adjustment with Adjustment
Knob
Use of width adjustment knob will
permit further adjustment within
the width range shown below
* When only left needle is used
5.2~6.7mm
* When only right needle is used
3~4.5mm