Preparing For Use; Device Use - Uniprodo Vander Pro Bedienungsanleitung

Please note: The illustrations of this product can be found on the last page of the
instruction manual (pp. xxx).
3.2.
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device should always be used
when positioned on an even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The
power cord connected to the appliance must be properly grounded and
correspond to the technical details on the product label.
Disassemble the device and all its components and clean them before the first
use.
3.3.
Preparation for threading

Preparing for use

Device use

EN
This machine is shipped with the thread
guide holder in the lowered position.
Fully extend the thread guide holder.
The two joints on the telescoping guide
will click into place when they are
correctly positioned.