UNIPRODO VANDER PRO Bedienungsanleitung Seite 119

EN
3.4.
Tips
How to sew a rolled hem
This machine can sew four types of rolled hems
Rolled hemming is done by rolling and overedging the fabric edge
Light weight fabrics such as lawn, voil, organdie, crepe, etc. perform the best
Rolled hemming is not suited for heavy or stiff fabrics.
Machine set up
Remove the left needle.
Move the seam width finger knob to
the "R" setting.
Align the left face of the seam width
finger support plate with the "R"
mark on the throat plate by turning
the seam width finger knob as
needed.
Set the stitch length dial to F ~ 2 for
fine seams.
Needle size: 80/11 or 90/14
Thread: A variety of thread
combinations can be used for rolled
hemming.