UNIPRODO VANDER PRO Bedienungsanleitung Seite 105

EN
To replace the cloth plate:
1 Align the projection on the
cloth plate with the groove in
the cylinder cover.
2 Slide the cloth plate to the
right until the tab on the front of
the cloth plate snaps into the
slot in the cylinder cover.
Standard overedge and rolled hem stitching
To Sew Standard Overedge
Set seam width finger knob to S
to move seam width finger to
projected position
Note: be sure to push seam width
finger knob as far as it will go in
the direction of setting S