UNIPRODO VANDER PRO Bedienungsanleitung Seite 130

How to replace the stationary knife
• Be sure that the power line
plug is
electric source
• The stationary knife should be
change when it becomes dull
The stationary knife can be
•
replaced
directions provided, however if
there are
experienced,
representative to make the
adjustment.
• Open the looper cover and set
the movable upper knife 1 in
the nonworking position
Loosen the stationary knife set
•
screw 2 and remove the
stationary knife 3
Place a new stationary knife in
•
the groove of the stationary
knife holder
Place a new stationary knife in
•
the groove of the stationary
holder
Tighten stationary knife set
•
screw 2
• Return the movable upper
knife 1 to its working position
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an
electric and electrical device recycling and collection point. Check the symbol on
the product, instruction manual and packaging. The plastics used to construct the
device can be recycled in accordance with their markings. By choosing to recycle
you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
disconnected from
according to
any difficulties
consult your
EN
the