UNIPRODO VANDER PRO Bedienungsanleitung Seite 97

EN
Pull the threads through the
machine one at a time.
If threads do not pull easily,
check for tangles on thread
guides or looping under
thread stand.
When pulling thread through
the needle, STOP when the
know is in front of the needle
Cut the thread, and insert it
through the needle
Return tension dials to
previous settings
BEFORE MAKING ADJUSTMENTS, BE SURE TO TURN OFF POWER SWITCH
How to adjust the stitch length
The stitch length dial should be set on
the 3mm (1/8 in) setting for most
sewing conditions.
Adjust the stitch length to 4mm
(5/32in) when sewing heavy weight
fabrics.
Adjust the stitch length to 2mm
(5/64in) when sewing light weight
fabrics to obtain excellent seams
without puckering.