Herunterladen Inhalt Inhalt Diese Seite drucken

UNIPRODO VANDER PRO Bedienungsanleitung Seite 74

Multifunktionale overlock-nähmaschine
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
f)
Do not wear loose clothing or jewellery. Keep hair, clothes and gloves away
from moving parts. Loose clothing, jewellery or long hair may get caught in
moving parts.
g)
Remove all adjusting tools or spanners before turning the device on. A tool or
spanner left in the revolving part of the device may cause injury.
h)
The device is not a toy. Children must be supervised to ensure that they do
not play with the device.
i)
Do not put your hands or other items inside the device while it is in use!
2.4.
Safe device use
a)
Do not use the device if the "ON/OFF" switch does not function properly
(does not switch the device on and off). Devices which cannot be switched on
and off using the ON/OFF switch are hazardous, should not be operated and
must be repaired.
b)
Make sure the plug is disconnected from the socket before attempting any
adjustments, accessory replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally activating the device.
c)
When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before each use check for
general damage, especially check moving components for cracked parts or
elements, and for any other conditions which may impact the safe operation
of the device. If damage is discovered, hand over the device for repair before
use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
g)
To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
h)
Avoid situations where the device stops working during use due to excessive
loading. This may result in overheating of the drive elements and damage to
the device.
i)
Do not touch articulated parts or accessories unless the device has been
disconnected from the power source.
j)
Do not move, adjust or rotate the device in the course of work.
k)
Do not leave this appliance unattended while it is in use.
l)
The device is not a toy. Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
EN
Inhaltsverzeichnis
loading

Inhaltsverzeichnis