Cleaning And Maintenance - Uniprodo Vander Pro Bedienungsanleitung

Pin placement
Insert pins to the left of the presser foot. The pins will be easy to remove and are
away from the cutting action of the knives
CAUTION!
Sewing over pins will damage and/or destroy the cutting edge of the knives.
Securing the thread chain
Thread a large eye, hand sewing needle (such as a tapestry needle) with the
•
thread chain
Insert the needle into the end of the seam to secure thread
•
Braiding by chaining off
• Place the movable knife in
nonworking position
Insert filler cord such as yarn or
•
twill tape through the hole in the
front of the foot.
Position the filler cord under the
•
foot and chain off the desired
length
Chained off braids can be used
•
individually or woven into 3 or 4 ply
braids
3.5.
a) Always unplug the device before cleaning it or lubricating.
b) Use only non-corrosive cleaners to clean the surface.

Cleaning and maintenance

EN