UNIPRODO VANDER PRO Bedienungsanleitung Seite 120

EN
Additional information about rolled hemming
Hold the thread chain when
you begin sewing to keep it
from furling into the seam
Place a slight tension on the
material in the sewing
direction and a finer seam
finish can be obtained
The minimum overedge stitch
width that can be obtained
for rolled hemming is
approximately 1.5mm
(1/16in) since the cutting
wigth cannot be set bellow
3.5mm(9/64in)
How to secure the rolled hem thread chain
Apply a small drop of liquid
seam sealant to the end of
the seam. Allow to dry, then
cut the chain close to the
stitches.
Note: Test the liquid seam
sealant for color fastness
before use