UNIPRODO VANDER PRO Bedienungsanleitung Seite 101

EN
Stretch Overedge
Stretch overedge is ideal for
sewing decorative collars,
sleeves, skirt hems, etc.
Set differential feed adjusting
lever knob above graduation
"1.0"
To sew a seam, apply gentle
tension to the fabric by holding
the seam lightly in front and
back of the presser foot
Note: If amount of stretch is
not correctly set in relation to
the fabric being sewn, the fabric
is apt to shift away from the
needle resulting in improperly
sewn overedge seam. IN such
case, reset differential feed
adjusting lever closer to the
centre mark.