UNIPRODO VANDER PRO Bedienungsanleitung Seite 80

How to remove and insert needles
EN
Center the thread guides above the
spool pins.
Place the thread over the cone adapters
on the spool pins.
Note: If the machine is threaded,
straighten the threads to prevent
tangling.
To Remove Needles
Be sure to disconnect the machine from
the electric outlet before removing
needles
Turn the handle wheel toward you until
the needle is at its highest position
Loosen, but do not remove, the needle
set screw with the small screwdriver.
Remove needles
1 Left needle set screw
2 Right needle set screw
3 Left needle
4 Right needle