UNIPRODO VANDER PRO Bedienungsanleitung Seite 129

c) Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
d) Do not spray the device with a water jet or submerge it in water.
e) Do not allow water to get inside the device through vents in the housing of
the device.
f) Clean the vents with a brush and compressed air.
g) The device must be regularly inspected to check its technical efficiency and
spot any damage.
h) Use a soft cloth for cleaning.
i) Do not clean the device with an acidic substance, agents of medical purposes,
thinners, fuel, oils or other chemical substances because it may damage the
device.
This device requires more maintenance than a conventional machine mainly due to
two reasons:
• A lot of lint is produced due to the cutting action of the knives
The device runs at a very high sped and needs to be oiled frequently to lubricate
•
the internal working parts
Oiling the machine
The oiling points shown in
the diagram, should be
oiled periodically.
Note: Use sewing machine
oil. Do not use any other oil
or damage could result.
EN