UNIPRODO VANDER PRO Bedienungsanleitung Seite 103

EN
BEFORE MAKING ADJUSTMENTS, BE SURE TO TURN OFF POWER SWITCH
Converting the upper looper into spreader
Installing the spreader
1 Insert the pin (A) of the spreader in
the hole (B) of the upper looper.
2 Put the positioning rib (C) in
contact with the upper surface of the
looper.
3 Insert the point (D) in the hole (E)
of the upper looper
Removing the spreader
1 Remove the point (D) of the hole
(E) of the upper looper and take the
spreader off the looper.