UNIPRODO VANDER PRO Bedienungsanleitung Seite 121

Stitch variations and sewing techniques
How to sew a flatlock decorative
seam
A flatlock stitch is achieved by
adjusting the tension of the 3-thread
overlock stitch, sewing the seam and
pulling the fabric aprat to flatten the
seam
The flatlock stitch can be used as a
construction and decorative stitch or
for ornamention only
Machine set up
Remove the left or right needle
•
• Begin with the machine
threaded and tension balanced
for 3-thread overlock stitch
• Lose the needle thread tension
(green or blue) generously
Loosen the upper looper thread
•
tension (orange) slightly
Tighten the lower looper thread
•
tension (yellow) generously
Flatlocking a seam
Place the fabric wrong sides
•
together to sew a decorative
stitch on the right side of the
garment
Sew the seam, trimming the
•
excess fabric
EN