Electrical Safety; Safety In The Workplace - Uniprodo Vander Pro Bedienungsanleitung

only and in some details may differ from the actual product.
2. Usage safety
Electrical equipment:
ATTENTION! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury or
even death.
Non-electrical equipment:
ATTENTION! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to
the:
MULTIFUNCTIONAL OVERLOCK SEWING MACHINE.
2.1.
a) The plug must fit the socket. Do not modify the plug in any way. Using
original plugs and matching sockets reduces the risk of electric shock.
b) Do not touch the device with wet or damp hands.
c) Use the cable only for its designated use. Never use it to carry the device or
to pull the plug out of a socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled cables increase the risk of
electric shock.
d) Do not use the device if the power cord is damaged or shows obvious signs of
wear. A damaged power cord should be replaced by a qualified electrician or
the manufacturer's service centre.
e) To avoid electric shock, do not immerse the cord, plug or device in water or
other liquids. Do not use the device on wet surfaces.
f) Do not use in very humid environments or in the direct vicinity of water
tanks.
g) Prevent the device from getting wet. Risk of electric shock!
h) Before the first use, please check whether the main voltage type and current
comply with the indicated data on the type plate.
2.2.

Electrical safety

Safety in the workplace

EN