UNIPRODO VANDER PRO Bedienungsanleitung Seite 102

How to disengage movable upper knife
To place movable
nonworking position
1 Turn handwheel over toward
you and rise upper knife to its
highest position
2 Open looper over
3 Push the movable knife holder
to the right as far as it will go
4 turn the knob away from you
until the knife
horizontal position
Note: If the knife stops in the up
position.
Turn the hand wheel toward you
until the knife clears the top of
the machine.
Continue to rotate the knife to
the horizontal position.
To place movable
working position
Open looper cover and push the
movable knife holder to the right
as far as it will go.
Turn the knob up and toward you
until the knife clicks into the
working position.
knife in
clicks into
knife in
EN