Fronius OPT/i Bedienungsanleitung Seite 31

Installation
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
NOTE!
After modifications, repairs, and installations or conversions, a safety inspec-
tion must be performed in accordance with the service instructions of the
machine.
▶
▶
▶
Required tools -
-
-
-
-
-
WARNING!
All the work and functions described in this document must only be carri-
ed out by a trained Fronius service technician.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this
equipment and all system components.
Observe the relevant national and regional requirements and standards.
The safety inspection must only be conducted on a fully assembled machi-
ne.
If a defect is identified during the inspection, the safety inspection must
be repeated once the defect has been eliminated.
TORX® screwdriver TX10
TORX® screwdriver TX25
Phillips® screwdriver
Drill size 14 mm (0.55 in.)
Flat spanner size 17 mm (0.70 in.)
Knife
Englisch (US)
31