Setting-Up And Adjustment - Scheppach HS720 Originalbetriebsanleitung

Wippkreissäge

Vorschau ausblenden Andere Handbücher für HS720:

Originalanleitung (56 Seiten)

Originalbetriebsanleitung (41 Seiten)

Original bedienungsanleitung (88 Seiten)

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Artikelnummer

Construction measurements:

Total length

Total width

Total height

Rocker support

Saw blade Ø

Idle - Motor

Cutting speed- Saw blade

Weight

Power unit:

Motor

Input power P1

Output power P2

Operating mode

Rated current

Work information

Cutting height Spar

Turning cut

Piece of wood

Specific noise values

The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2

from EN 31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts

under the foundations of ISO 7904 supplement A performed working conditions to:

Sound pressure level in dB

Idle LWA / Processing LWA

dB(A)

Sound pressure level on working site in dB

Idle LpAeq / Processing LpAeq

dB(A)

The specified values are emission values and therefore should not at the same time be reliable working site values. Although

there is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions need to be

taken or not. Factors, which influence the actual availabe immusion value on working site, include the peculiarities of wor-

king area, other sources of noise, e.g. the number of machines and other adjoining processes. The allowed working values

could vary from country to country. However, the information should qualify the user, to be able to make an estimation of the

dangers and risks.

Assembly

The machine is delivered, except for the handle bar, completely assembled and is therefore immediately ready to operate.

Demount the handle bar from the rocker joint and insert it into the left frame side wall.