Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE:Ifyou fail to add thesmokealarm to the network within 60 seconds,thedevicewill say "Verbindung
fehlgeschlagen.Bitte versuchenSieesnoch einmal." And then it will automatically exit thenetwork configuration.
Tore-enterthe network configuration, you needto repeat theabove steps.
App Features
Notifications:
You will receive push notifications on the app for smoke alarms, danger c eared, ow battery,
device malfunction,
end of life, etc.
Night Mode: You can activate the night mode and set a specific time period which the LED light will not
illuminate periodical y to avoid disturbing your sleep.
Device Test: Simply tap the Device Test button in the app to test whether the device is functioning properly.
Device Sharing: You can share the device with your family members and friends. They will receive app push
notifications for alarms and have the abi ity to si ence the device, view historical events, etc.
Interconnect
the Alarms Without
Station
f you don't want to add the smoke alarms to the base station, you can connect the smoke alarms using RF
technology to create an interconnected alarm system. However, you wil no onger be able to receive push
notifications on your phone from the X-Sense Home Security app.
NOTE: T heXP02S-MR smokealarmscan beconnectedto theX-Sense Link* Proand Link* alarms usingwireless
interconnection without being connectedto the basestation.
Powering On Before Setting the Location
For first-time use,simply remove the battery insu ation fi m from the battery compartment to turn on the
device. After the device is powered on, the device will say"Hal o von X Sense." hen, the device wi say
"Standort nicht festgelegt. Drücken Sie die Taste„Standort", um einen Standort auszuwählen."
f the device's battery has been replaced, and the ocation has been set, then the device wi say"Drücken Sie
zum Testen die Taste Jest/StummschaIten"."
During this voice report process, if you press the Test/SiIence button, there wi be no response.
Setting the Location
Pleasefol ow the steps below to set the device ocation so that it is accurate to the actual instal
Adding
to the Base
ation
• 06 •
l. After the device is powered on and the voice is finished, press the Location button. f the ocation has not
been set, the device wi say "Standort nicht festgelegt. Drücken Sie die Taste „Standort", um einen
Standort auszuwählen." Ifthe ocation has been set, the deuce wil say "Standort festgelegt. Drücken Sie
die Taste „Standort" erneut, um den festgelegten Standort zu ändern."
2. After step I, press the Location button again. The device will say "Drücken Siedie Taste Standort" für den
nächsten Standort. Drücken Sie zweimal kurz auf die Taste „Standort",
Halten Sie die Taste „Standort" gedrückt, um den Standort zu speichern."
3. After step 2, press the Location button again. The device will say "Eingangsbereich."
4 After entering the ocation list, press the location button for the next location. Quickly press the Location
button
twice
5. he ocation list will be repeated. When the device says "Kein Standort," press the ocation button again,
and "Eingangsbereich" wi be reported again.
6. When the ocation is saved, the device will say "Standort gespeichert."
7. here is a I-minute timeout limit when the product is in setting mode. Ifthere is no operation within 1
minute, it will automatical y exit and return to standby mode, and wi say "Der Standort konnte nicht
festgelegt werden. Bitte versuchen Sie es erneut.
Location
List
3
5
6
7
8
9
How to Set Up and Interconnect
A1 X-Sensewireless interlinked a arms contain a built-in RFmodu e that enables you to wireless y connect 2
or more interlinked alarms and create an interlinked network. When one unit is triggered, all interconnected
alarms will sound. The X Sense wireless interconnected
wireless interlinked
This model is designed to be wirelessly interlinked with other X Sense alarms, but is not designed to
communicate
with
ocation.
for the last location.
Hold down
the Location
button
Ein
an
sbereich
Kel er
11
Wohnzimmer
12
Esszimmer
13
Küche
14
Hauptschlafzimmer
Kinderzimmer
Gästezimmer
Wireless Alarms
alarms contain wireless interlinked
carbon monoxide
a arms, and wireless interlinked
wireless
interlinked
alarms
from
other
manufacturers.
•07
•
um den Ietzten Standort zu wählen.
to save the location.
10
Gemeinschaftsräume
Familienzimmer
Arbeitszimmer
Büro
Werkstatt
Hauswirtschaftsraum
15
16
Dachboden
Kein Standort
smoke a arms,
smoke and carbon monoxide
a arms.
Werbung
