Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The alarm does not sound
The device
does not
during a test.
turn
on.
You don't push the
Test/SiIencebutton firmly,
When the test button
is held
down, only one alarm sounds and
the other
interconnected
alarms
do not respond.
Falsealarms are triggered
The device
is
improperly instaled
intermittently
when residents are
cooking, taking showers,etc.
The device is clogged
by dirt and dust.
When an alarm sounds,
the voice
The initiating alarm does
not support ocation.
does not announce the location,
but only announces "Warnung.
Rauch entdeckt.
Evakuieren
Sie."
It is unclear how to judge which
alarm is triggered first.
Remove the battery insulating film from the
battery compartment to turn on the device. If
the battery runs out, pleasereplacethe
battery.
Make sure you have pushed the Test/SiIence
button firmly.
When connected to a basestation, holding
down the test button on y tests a single
device.
• When connected
to a wireless interconnected
network, holding down the test button wil
test all devices in the network.
• When exited from the wireless
interconnected
network, holding down the test button Only
tests asingle device.
A short presson the test button will a ways
test a single device.
nstallthe devicefar awayfrom kitchen
appliances,dusty p aces,shower areas, a nd
ocations where the temperature is over 1000F
(37_80C) o r below 400F(4_40C). C heck the
ocation of your a arm (see"Installation
Positioning").
Clean the device periodicaly (see
"Maintenance").
f the initiating alarmis a voice alarmwith
ocation support (such as XP02S-MR),the
other
interconnected
voice alarms with
ocatlon support will also provide ocation
information. However,if the initiating alarmis
without
ocation support, the other
interconnected
voce
alarms with
ocation
support (suchasXP02S-WR) will reay the
voice alert without specifying the ocation.
Lookin the app (when connected to the base
station):on y the initiating aarm will be
displayed as being triggered, and the other
alarms will not.
• 22 •
The previous set location is
None.
forgotten.
The alarm
cannot
be added to
the base station.
enter pairing mode.
The alarm volume
of the base
The alarm sound
to low,
station
is low.
The app push notification is
The battery ran out.
delayed or there are no push
alerts.
The app push
notification permission
is disabled.
The base station is not
within
the network
coverageof the router.
The communication
between
the a arm and
base station
is not stable
or they are too far apart.
Determineby the voice:All alarmsinthe
network will report the voice with the ocation
where the initiating one is triggered.
Judge by the color of the LED indicator: the
Initiating alarmflashesred, andthe other alarms
alternateflashing red and green.
Press the test button: In the alarming mode,
press the test/silence button on any of the
devices. If al other a arms are muted, the device
you pressedis the sourcealarm,if not,then the
source alarm is the one you will hear continuing
to alarm. You need to press the test/silence
button to silence the initiating alarm.
Go to the devicepage in the app, where you wil
find the ocation disp ayed in the details.
Removethe devicefrom the mounting bracket
and press the Location button on the back. Then
the devicewi report the current location. f you
need to reset the ocation, press the Location
button again, and fol ow the instructions and
voice prompts.
Quickly press the pairing button twice On the
alarm until it flashesblue rapid y,indicating it
hasentered pairing mode.
is set
Go to "Base Station Alarm Volume"
in the "Sound
Settings"option to adjust the alarmsound.
Unscrew the alarm from the bracket, bring the
unit indoors to charge,then reinsta
Turn on the push notification permissionon the
phone.
The distance
between
the base station and the
router should be within 170 ft (50 m). Please
ensurethat the basestation is alwayswithin the
network coverage of the router.
Reduce the obstacles
between
the alarm and
base station.
The maximum
distance
between
the a arm and the base station in an open
environment is 1,700 ft (500 m).
• 23 •
Werbung
