x-sense Link+ Pro Bedienungsanleitung Seite 2

Contents
English
Deutsch
01 24
25 49
English
This user manual contains important information about your smoke alarm's operation. To ensure
proper use and trouble-free operation, please read this manual carefully and store it in a safe place for
future reference.
Introduction
Thank you for your purchase. This smoke a arm uses photoelectric technology, which is effective at detecting
arge particles common y produced during smoldering fires that may smolder for hours before igniting.
Multiple XP02S MR smoke alarms can be connected to the X-SenseSBS50base station using the X-Sense
Home Security app. After connecting to the base station, these alarms will be interconnected, so when one
alarm is triggered, al wi sound an alarm.
This alarm supports Link* Pro. Please note the following:
1. On y devices that are advertised as supporting Link' Pro can be connected to the app via the base station.
2. Link* Pro supports both base station connection and a customizable wire essnetwork as separate
networks. You can only connect a device to one of them at a time. f you connect them to the base station,
you'l receive app notifications but ose the customizable wireless network. Choosing the customizable
wireless network means disconnecting from the base station and osing app notifications. Wireless
interconnection is supported regardless of your choice.
3. This device can be interconnected with other
network.
4. Switching between the base station and customizable wireless network is simple and can be done at any
time by fol owing the corresponding adding method.
5. Please note that the interlinked test function is not supported by the base station.
Link* series devices to create a customizable wireless