Parts Identification; Charging The Shaver - Panasonic ES-LV65 Bedienungsanleitung

Parts identification

A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release
buttons
5 Finger rest
6 Power switch
7 Lock ring
8 Lamp display
a. Used time lamp
b. Battery capacity lamp
c. Shaving sensor lamp
( )
d. Clean lamp
e. Foil/blade check lamp
f. Charge status lamp
( )
9 Appliance socket
 Outer foil section
Using the lock ring
Use the lock ring [A7] to lock or unlock the power switch [A6].
Rotate the lock ring until it clicks.
Rotate the lock ring to "
power switch:
Used when shaving, washing the shaver,
lubricating the shaver.
Rotate the lock ring to "
switch:
Used when carrying the shaver.
12
 System outer foil release
buttons
 Inner blades
 Trimmer
 Trimmer handle
B AC adaptor (RE7-59)
(The shape of the AC
adaptor differs
depending on the area.)
 Adaptor
 Power plug
 Cord
 Appliance plug
Accessories
C Travel case
D Cleaning brush
 Oil
 Operating Instructions
 Guarantee Card
" to unlock the
" to lock the power

Charging the shaver

1
1
Insert the appliance plug [B]
into the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor [B] into a
household outlet.
• Check that the charge status lamp
( ) glows.
• Charging is completed after approx. 1 hour.
The charging time may decrease depending on the
charging capacity.
• Wipe off any water droplets on the appliance socket.
• Check that the outer foil is not deformed or damaged
when you are attaching the shaver.
While charging
The charge status lamp (
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
1
After charging is completed
)
The battery capacity lamp
and the charge status lamp
will light up and then turn off
after 5 seconds.
2