Using The Shaver - Panasonic ES-LV65 Bedienungsanleitung

Abnormal charging
The charge status lamp (
• After charging is completed, turning the power switch ON
with the shaver plugged in will cause the battery capacity
lamp and the charge status lamp to light up and then turn off
after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient
temperature range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp
( ) may not glow. It will eventually glow if kept connected.
3
3
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
) will blink twice every second.

Using the shaver

1
1
Rotate the lock ring [A7] to unlock the power
switch [A6]. (See page 12.)
2
2
Press the power switch to select the desired
shaving mode.
• Each time you press the power switch, the shaving
mode changes from "Shaving sensor mode"
mode" "OFF".
Shaving Shaving sensor
mode mode
Beard thickness
is automatically
sensed and the
Description power is
automatically
adjusted when
shaving.
Operation
Shaving
sensor lamp
The shaving
sensor lamp
blinks.
"Normal
Normal mode OFF
The power
level is
constantly —
maintained
while shaving.
— —
The shaving The shaving
sensor lamp sensor lamp
turns off. turns off.
13