Cleaning With The Brush - Panasonic ES-LV65 Bedienungsanleitung

Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of
the outer foils.
3. Raise the trimmer and apply a
drop of oil.
4. Switch the shaver on, and run it
for approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the
outer foils with a soft cloth.

Cleaning with the brush

►Cleaning with the long brush
Clean the system outer foil
(a), the shaver body (b)
and the trimmer (c) using
the long brush.
►Cleaning with the short brush
Clean the inner blades [A] using the short
brush by moving it in direction (A).
• Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
• Do not use the short brush to clean the outer
foils.
16
2 3
  
(A)
(B)
Replacing the system outer foil and the inner blades
appears on the lamp display once a year. (This will differ
depending on usage.) We recommend checking the system
outer foil and the inner blades when it appears.
Press the power switch for more than 30 seconds to turn off
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons [A4] and
lift the outer foil section [A] upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section [A]
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A] and pull down the system
outer foil.
2. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be
reversely attached.
• Always insert the system outer foil to
the foil frame when attaching to the
shaver.
) to the
2
) and the
1
.
1