KPS DCM300MINI Benutzerhandbuch Seite 2

DCM300MINI
1. Safety Information
WARNING
The special attention should be paid when using the meter
because the improper usage may cause electric shock and
damage the meter. The safety measures in common safety
regulations and operating instruction should be followed
when using. In order to make fully use of its functions and
ensure safe operations please comply with the usage in
this section carefully.
The meter is designed and manufactured according to
safety requirements of EN 61010-1, EN 61010-2-032, on
electronic measuring instrument and hand held digital
multifunction meter. And the meter conforms to UL STD.
61010-1, 61010-2-032, Certified to CSA STD. C22.2
61010-1-12, C22.2 61010-2-032. The meter meets with the
requirements of 600V CAT III and pollution degree 2.
All safety guidelines outlined should be followed, otherwise
the protection provided by the meter may be impaired.
Warning symbols in the manual alert users to potential
dangerous situations.
Precautions are to prevent the user from damaging the
meter or the test object.
1.1 Preliminary
1.1.1 When using the meter, the user should comply with
standard safety rules
- General shock protection
- Prevent misusing the meter
- Individual protective equipment must be used to prevent
shock and arc blast injury where hazardous live
conductors are exposed.
- The meter is only for indoor use.
1.1.2 Please check for damage during transportation after
receiving the meter.
1.1.3 If the meter is stored and shipped under hard
conditions, please confirm if the meter is damaged.
1.1.4 Probe should be in good condition. Before use,
please check whether the probe insulation is damaged
1
EN