What To Do If - IKEA FRAMTID OV9 Instruction For Use

ENGLISH

What to do if ...

Problem
The oven does not
work:
The oven door is
locked and will
not release (Nutid
OV9 – Framtid
OV9 version)
The oven door is
locked and will not
release (Framtid
OV5 – Datid OV7
version)
The electronic
programmer does
not work (Nutid
and Framtid OV9
version)
Energy consumption with a standard load and pastry function Kwh
Possible cause
No electrical power supply.
The oven is not plugged into the
mains socket.
The selector knob is set to "0".
The selector knob is set to " ".
Electrical malfunction due to
voltage fluctuations.
Electrical malfunction due to
voltage fluctuations.
Electrical malfunction due to
voltage fluctuations.
Solution
Verify the presence of mains
electrical power
Connect the oven to the power
supply.
Turn the selector knob to select a
cooking function.
Turn the selector knob to select a
cooking function.
Switch the oven off and then on
again to see if the fault has been
eliminated.
For Framtid OV5
- Set the function selector knob
to "0".
- Set the timer to 5 min and
wait for the oven door to be
released.
For Datid OV7
- Set the function selector knob
to F .
- Set the clock to
"Control panel").
Wait 2 minutes for the door to be
released.
If the electronic programmer
(depending on the model) shows
"F HH", contact the nearest After-
Sales Service.
Specify in this case the number
that follows the letter "F".
16
(see