Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2.1
Reasonable foreseeable incorrect use
To maintain the function of the multiline, please take care to avoid the following in
particular:
n
Incorrect use of design versions (e.g. incorrect sealing materials).
n
Excessive ambient temperatures.
Excessive media temperature.
n
n
Incompatible accessory parts.
Incorrect dosing lines.
n
n
Line cross-sections too small.
n
Viscosities too high or too low.
n
Use of unsuitable dosing media.
2.2.2
Arbitrary conversion and spare parts production
CAUTION!
Changes or modifications are not permitted without prior, written permission
from Ecolab Engineering GmbH and result in the forfeiting of any and all
warranty entitlements. Original spare parts and accessories approved by
the manufacturer to increase safety. The use of other parts excludes the
warranty for the resulting consequences. We would like to point out that
the CE conformity expires in case of subsequent conversions!
2.3
Safety precautions by the owner
NOTICE!
Please note that the operator must train, instruct and monitor its operating
and maintenance personnel with regard to compliance with all necessary
safety precautions.
The frequency of inspections and control measures must be observed
and documented!
WARNING!
Requirements for system components provided by the operator
To avoid personal injury and damage to the system, it must be ensured that
the system components provided to you (pipe connections, flanges) have
been correctly installed. We recommend compensators for the transition
from plastic to stainless steel pipes in order to minimise loads during
installation and operation. If the installation is not carried out by Ecolab
Engineering GmbH Customer Support / Service, steps must be taken to
ensure that the pipe and metering lines consist of the correct materials and
meet the requirements with regard to length and diameter.
13
Safety
417101357 Rev. 4-02.2020
Werbung
