1.2
Transport
NOTICE!
Material damage due to improper transportation!
Transport units can fall or tip over if improperly transported. This can cause
a large amount of damage. When unloading the shipping crates, during
delivery or even during general shipping, proceed safely and pay attention
to the symbols and the information on the packaging.
Danger of putting into operation a piece of transport equipment which
has been damaged during transport:
If damages are discovered during unpacking, do not install or put unit into
operation, as otherwise uncontrollable faults can occur.
Transport inspection:
Examine delivery for completeness and transportation damages and report
every damage. Damage claims can only be filed within the applicable
period for complaints.
In event of transportation damages visible from the outside:
Do not accept the delivery or accept provisionally. Note the extent of
damage on transport documents Delivery note of the carrier and initiate a
complaint immediately.
The measurements of the packaging and the weight of the packaging can be found online
Ä 10 'Technical Data' on page 33.
1.3
Packaging
The individual packages are packaged according to the expected transport conditions.
Only environment-friendly materials were used for the packaging. The packaging is
designed to protect the individual components up to assembly against shipping damage,
corrosion and other damage. Do not destroy the packaging and only remove it just before
assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
9
General information
417101357 Rev. 4-02.2020