Technical Data; Battery Control Lamps - Cleanmaxx Zj8236D Gebrauchsanleitung

The battery is not charging up. The
battery control lamps
flashing / lit.
The charger cable is not connected correctly
to the device or power source.
► Check the connection and correct it.
The mains adapter is not suitable.
► Use a suitable mains adapter (see the
"Technical Data" chapter).

TECHNICAL DATA

Article number:
ID of operating instructions:
Model number:
Voltage supply:
Power:
Suction force:
Battery charge time:
Battery operating time:
Protection class:
Mains adapter required:
(8) are not
13866
Z 13866 M DS V1 1223 as
ZJ8236D
14.8 V DC (Li-ion battery; 2200 mAh)
140 W
max. 12 kPa
approx. 4 hours
approx. 12 minutes (high suction level
approx. 22 minutes (low suction level
(with a fully charged battery)
III
5 V and ≥ 2000 mA
The plug socket is defective.
► Try another plug socket.
Unusual odour
The device is being used for the first time.
► A new odour is normal when the device
is used for the first time; it disappears
after a while.
EN
)
)
19