Floor Nozzle (1 X); Wall Mounting Bracket (1 X); Combi Nozzle (1 X); Extension Tube (1 X) - Cleanmaxx Zj8236D Gebrauchsanleitung

EN
WALL MOUNTING
BRACKET
Please Note!
■ Make sure that the surface on which
the wall mounting bracket is attached
is stable.
The device can be stored in the wall mount-
ing bracket (2) and charged up there for its
next use.
L
Ideally attach the wall mounting
bracket near to an easily accessible
plug socket so that the device can
be charged.
Sticking On the Wall Mounting
Bracket
Make sure that the spot on which the wall
mounting bracket is to be stuck is clean, dry
and free of dust.
1. Peel off the protective strip from the
adhesive pad on the back of the wall
mounting bracket.
2. Stick the wall mounting bracket straight
onto the wall and press it on firmly.
16

ACCESSORIES

Floor Nozzle
The floor nozzle (1) is suitable for both
carpets and hard floors.
The floor nozzle can only be fixed in the
suction opening (21) with the extension
tube (6).
Combi Nozzle
The combi nozzle (3) is a combination of a
small crevice nozzle and brush nozzle. Press
the release button on the brush attachment
and slide it upwards at the same time to
convert the crevice nozzle into a brush nozzle
(Picture C). The brush attachment must be
heard to engage in place:
○ The small crevice nozzle is ideal for
places which are hard to get to, such
as corners, crevices or recesses as
well as upholstery and all nooks and
crannies that cannot be reached with
other nozzles.
○ The brush nozzle is used for dusting
all uneven objects, furniture, lamp
shades, picture frames, keyboards,
books etc.
The combi nozzle can be fixed in the suction
opening (21) both with and without the
extension tube (6).
Extension Tube
The extension tube (6) is intended to be
used with the floor nozzle (1) for cleaning
floors (Picture E). In addition, it makes it
easier to reach ceilings and corners.