Attachment Separatory Funnels (Promax 1020 Preferred) - Heidolph Unimax 1010 Bedienungsanleitung

Assembly

Attachment separatory funnels (Promax 1020 preferred)

Components Erlenmeyer attachment:
▪
1 attachment
▪
4 knurled bolts
➜ Locate attachment on rubber plate.
➜ Secure attachment at the four corners
of shaker plate with 4 knurled bolts.
➜ Load separatory funnel outlet pipe first
in place.
➜ Unlock pressure pad by pulling knurled
knob.
➜ Introduce opposite end of funnel in rubber
grommet and slowly release pressure
pad until funnel is locked in place.
✓ With this sort of clamping, funnel's
ground plug is held in place firmly.
Caution
Risk of breakage! Risk of injury!
Separatory funnels are very delicate especially at the tip and may
break when inserted without care.
Handle separatory funnels carefully when clamping.
Outlet pipe
21
Knurled knob