Heidolph Unimax 1010 Bedienungsanleitung Seite 16

Operation
imer mode
➜ Set time between 0 and 999 minutes with Set Time keys ▲ or ▼.
✓ Short hits on the keys change time setting slowly.
✓ Depressing keys is going to change time rapidly.
➜ Set speed with analog knob.
➜ Start shaking with Start/Stop key.
✓ Start and speed LEDs enlighten.
✓ Time lapse appears in a 3-digit display.
➜ Discontinue current shaking action with the Start/Stop key.
✓ Actual time won't change.
➜ Hit Start/Stop key to continue shaking at the moment it had been discontinued.
✓ In case of a power supply failure or interruption (item turned off), this feature is lost.
➜ Hit Select key during timer-controlled operation to change display from time to
shaking frequency and vice versa.
✓ Speed LED turns on.
✓ Timer LED flashes to indicate timer operation mode.
✓ Timer LED also flashes, when timer-controlled operation was discontinued with the
Start/Stop key.
Repetition
Repeating last timer controlled operation does not require new time setting, as long as
you did not touch the master switch.
Edit time during shaking operation
Time setting may be changed during operation, while timer is running and even if timer
controlled operation is discontinued.
The pre-programmed time remains in memory.
16