Hei-Mix Duomax 1030 / Polymax 1040 - Heidolph Unimax 1010 Bedienungsanleitung

Operation

Hei-MIX Duomax 1030 / Polymax 1040

(with mechanical timer)
You can choose from two shaking options:
▪ Continuous mode: The unit starts and stops shaking as soon as you switch it on or off.
▪
Timer mode: The time for shaking can be set between 0 and 120 minutes. The unit
stops shaking when the time has elapsed.
Warning:
Risk of injury!
Returning power after a power cut off will restart shaking mode. There
is a risk of injury in the vicinity of moving parts of device.
Before working with the device or in the vicinity ensure all controls are
switched to "0" or "OFF" mode, when device is not moving.
Continuous mode
✓ Select mode switch is positioned to
continuous mode „0".
➜ Turn item on with ON/OFF switch.
➜ Set speed with analog knob „Speed".
✓ Actual speed appears in the 3-digit
digital display.
➜ Turn speed off.
➜ Turn item off with ON/OFF switch.
Timer mode
➜ Select timer mode „Timer" with select mode switch.
➜ Set time with analog knob „Time".
➜ Set speed with analog knob „Speed".
➜ Turn item on with ON/OFF switch.
✓ When time has elapsed an acoustic signal will be audible and shaking action will stop.
➜ Turn speed off.
➜ Turn item off with ON/OFF switch.
A power cut will stop shaking mode. The timer will continue running
even in case of power supply failure.
Analog knob
„Time"
Analog knob „Speed"
14
Select mode Switch
continuous / timer