Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
1.
Introduction
We appreciate your decision to purchase this high-quality soldering station. The DIGITAL
2000 A from Ersa is a top-of-the-line micro-processor-controlled soldering station. It is
designed for use in industrial production, repairs and in laboratories.
1.1
Supply Unit
The use of a microprocessor facilitates operation and sets new standards for the func-
tions available at the soldering station. Five independent tool settings can be made and
saved by means of a simple menu guide.
The DIGITAL 2000 A can be operated with various soldering tools. Besides the universal
soldering irons, POWER TOOL and TECH TOOL, the fine-pitch soldering iron MICRO TOOL
and the CHIP TOOL can be connected to the station for processing SMCs. The optionally
connectable X-TOOL desoldering iron rounds off our range of tools. The soldering station
can be used for simple temperature measurements when a temperature sensor is con-
nected as tool (Pr5).
A wide variety of functions, high speed and control precision make this soldering station
especially suitable for manufacturing processes subject to stringent quality require-
ments.
Equipment features:
38
•
Antistatic design
•
Potential equalisation
•
Full-wave control
•
24 V small voltage for soldering irons
•
VDE-GS, CE, VDE-EMC marks of conformity
3BA00044-00 • 2013-05-23 • Rev. 4
ersa DIGITAL 2000 A
Werbung
