NOTE
6.2
Display
4-digit display
showing the
process
dimensions and
parameters
Manual mode
Fig. 9: Flow regulator disply Type 8623-2
58
•
After the supply voltage has been switched on, the regulator
will be in the standard mode.
•
Changing to the other operational modes is possible as
shown in Fig. 8.
•
Once the configuration mode has been completed, the set
parameters will be transferred to the memory of the
regulator.
•
Once the operational voltage has been switched off, the last
active parameters will be stored: these will become active
the next time the unit is switched on.
Display of the set-point:
- internal set-point (no display)
- external set-point (1)
- ratio control (2)
4-digit text display, e.g.,
display of the flow units in
l/s. l/min, etc.
Type 8623-2