Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6 | Maintenance
6
Maintenance
WARNING
Non-regular cleaning of the UltraVent
Plus condensation hood
Risk of fire due to dirty condensation
hood.
Clean the condensation hood regularly
according to the manufacturer's
recommendations.
CAUTION
Sharp-edged panels
Risk of cuts when taking off the
UltraVent Plus condensation hood lid.
Wear protective gloves during
installation and maintenance.
Clean the lid and interior of the
condensation hood
a
The unit on which the condensation
hood is to be installed is disconnected
from the mains.
a
The condensation hood is disconnec-
ted from the mains.
1. On the rear side of the condensation
hood, remove the 4 screws attaching
the touch protection, and remove the
touch protection.
2. Remove the 2 screws on the top side
of the condensation hood
[
Figure
32].
3. Lift up the lid of the condensation
hood.
4. If the lid is dirty, clean the lid with a
grease remover.
80.51.570_iCombiPro-iCombiClassic_UV-P_IM_EU-west
5. If the lid is very dirty, remove the
screws in the lid and disassemble it
[
Figure
33], to clean the lid in the
dishwasher.
6. Remove the filter cassette from the in-
terior of the condensation hood (see
HEPA filter replacement).
7. Clean the interior of the condensation
hood with a degreasing agent
[
Figure
34].
8. Mount the filter cassette in the interior
of the condensation hood (see HEPA
filter replacement).
9. Secure the lid of the condensation
hood with the 2 screws.
10. Secure the touch protection on the
rear side of the condensation hood
with the 4 screws.
Cleaning the particle filter and interior of
the condensation hood
a
The unit on which the condensation
hood is to be installed is disconnected
from the mains.
a
The condensation hood is disconnec-
ted from the mains.
1. Remove the particle filter and clean the
filter in the dishwasher.
2. On the front side, remove the prefilter
[
Figure
35] and clean the prefilter
in the dishwasher.
3. Spray the interior of the condensation
hood with a mild cleaning agent
[
Figure
34].
4. Clean the interior of the unit with the
hand shower.
5. Replace the particle filter on the front
side.
6. Mount the particle filter on the front
side.
English
25 / 160
Werbung
