Werbung
Verfügbare Sprachen
Verfügbare Sprachen
M
200D
INIVAC
1.4 Location of the installation
Minivac extraction systems are only suitable for use in dry, roofed rooms protected from the weather.
It must be ensured that the extraction system can blow out freely on the exhaust air side.
1.5 Transporting the extraction system
Prior to transporting the extraction system remove all connected cables, such as power cables, the compressed air supply line, the
sensor cable or flex hose to prevent damage to the extraction system.
1.6 Scope of delivery
Minivac 200 D extraction system with wheel set and self dedusting system
Operating instructions in German or English
3m power cable with quick plug connector
1 pair of protective gloves
1 particle dust mask (FFP 2 or KN 95)
1 plastic bag for filter change
1 plastic bag for particle container
2 cable ties to seal the plastic bag
1.7 Equipment overview
Equipment / model
Brushless continuous motor
Bypass cooling system with filter
Automatic start/stop function
Remote start function
Filtercheck
Self-dedusting system
Automatic dedusting function
Particle filter system
Speed, Extraction performance control
Automatic extraction performance control
Fault indicator
Filter change with memory function
Acoustic key acknowledgement
Low pressure indicator
Potentiometer for overrun time
Extern out
12
Minivac 200D
•
•
•
•
•
•
•
•
•
optional
•
•
•
optional
optional (Standard 15s)
optional
1.0 Introduction
Werbung
