Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*
If it is probable, that the instrument´s protection has been
impaired due to electrical, mechanical or environmental
damage, it must not be used. It should be returned to your
nearest distributor or agent for checking and repair.
*
To prevent damage to the liquid crystal display, the minimum
storage temperature of –20°C must be observed. It should
also noted that below 0°C the operation of the LCD will be
sluggish.
*
If the exterior of the instrument requires cleaning, it should
be done with a sponge and a mild solution of detergent and
water. Other mechanical cleaning agents must not be used.
5.4. Measuring
*
Perform the preliminary checks before proceeding with
measurement and ensure, that the precautions listed are
observed.
*
Connect the test leads (color coded) to the instrument as
shown.
*
The current test leads must always be outside of the
potential test leads.
*
Please note, that the shorter the potential test leads, the
better. Long potential test leads will pick up noise.
*
Screened test leads are recommended for better environ-
mental noise rejection.
-24-
Werbung
Inhaltsverzeichnis
