General Description - PeakTech 1125 Bedienungsanleitung

* Always replace the fuse with the type specified and ensure
that they are correctly fitted.
* Double check the switch settings and leads connections
before measuring. Make a sketch to ensure proper operation
and principle
understood.
* Don not touch any exposed wiring, connections or other
"live" parts on an electrical circuit. If in doubt, check the
circuit first for voltage before touching it.
* This instrument should only be used by a competant,
suitable trained person, which understand fully this test
& measurement procedure.
* Mearsuring instruments don´t belong to children hands.
Caution!! Risk of electric shock
Caution !! Refer to the user´s manual

3. General Description

The PeakTech
instrument with which stable, accurate measurement of low
resistance can be made, still, over a wide range is of values.
Resolution on the lowest range is 100 µOhm and on the highest
range, 1 Ohm.
of measurement
®
1125 digital Milli-Ohmmeter is a low current
is
-18-
correct and well