Pari COMPACT2 Gebrauchsanweisung Seite 75

Procedure
Ensure that there is no residual moisture remaining in the components. If neces-
sary:
• Shake the water out of all of the parts.
• Place all parts on a dry, clean and absorbent surface and allow them to dry
completely.
• Using a standard thermal disinfector for baby bottles: Leave all individual parts
in the closed thermal disinfector for max. 24 hours until the next use.
Inspect all product components after each cleaning, disinfection or, where applic-
able, sterilisation. Replace defective, deformed or seriously discoloured parts.
Store this product as described below:
– Dry and dust-free, e.g. in a clean, lint-free cloth (e.g. a tea towel)
– Protected against contamination, where necessary (e.g. using optional sterile
packaging)
For sterilisation, use a process compliant with the ISO 17665 series of
standards.
PROCEDURE:
Sterilisation temperature and holding time:
– Temperature: 134 °C
– Holding time: minimum 3 minutes to maximum 5 minutes
Information on sterilising a PARI mask soft:
Always use the corresponding mask stabiliser
when sterilising this mask type, because other-
wise the mask may lose its shape under the ef-
fects of high temperatures.
• Insert the mask stabiliser in the mask as shown in the illustration.
• Pack all the disassembled parts in a sterile barrier system according to
ISO 11607-1 (e.g. foil-paper packaging).
• Carry out the sterilisation in a steam steriliser in accordance with the
manufacturer's instructions.
31