Pari COMPACT2 Gebrauchsanweisung Seite 68

3.4 Ending the treatment
• Switch the compressor off by shifting the on/off switch to "OFF".
• Place the nebuliser back in the holder on the compressor.
• Disconnect the power plug from the mains socket.
Complete disconnection from the mains is only certain when the power plug has been
unplugged from the socket.
3.5 Storage
After ending the treatment, store the compressor as described below:
When putting the compressor away, unplug the power plug from the socket. Electrical
devices that remain plugged into the power supply present a potential hazard source.
• NOTE! Do not wind the power cord around the com-
pressor. If the power cord is wound or bent very
tightly, the wires inside the cord may break. The power
cord will then be unusable.
Wind the power cord up loosely.
• Secure the cable end in the cable holder.
24