Cleaning And Maintenance; Cleaning; Maintenance; Storage - Parkside Performance Ppsbsa 20-Li A1 Originalbetriebsanleitung

GB MT
Cleaning and

maintenance

Contact our Service Centre about
repairs and servicing not described
in­this­manual.­Only­use­OEM­
parts. Risk of injury!
Turn off the appliance and, before do-
ing any servicing, remove the battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or sol-
vents.­You­may­otherwise­irreparably­
damage the appliance.
Maintenance
The appliance cleaner is maintenance free.

Storage

• Store the equipment in a dry place well
out of reach of children.
• The storage temperature for the re-
chargeable battery and the device is
between 0°C and 45°C. Avoid extreme
cold or heat during storage to ensure the
battery output is not adversely affected.
• Store the device in the supplied
case (22).­
36
Replacement parts/
accessories
Spare parts and accessories can be
obtained at
www.grizzlytools.shop
If you have issues ordering, please use the
contact form. If you have any other questions,
contact­the­"Service-Center"­(see­page­38).
Keyless chuck ........................91105376
Auxiliary handle ....................91110031
Depth stop.............................91110029
Disposal and protection
of the environment
Remove the rechargeable battery before
disposing of the device!
The device, accessories and packaging
should be properly recycled.
Instruction on how to dispose of the rechar-
geable battery can be found in the separa-
te instruction manual for your battery and
charger
Electrical­appliances­must­not­be­
disposed of with the domestic
waste.
Directive­2012/19/EU­on­waste­electrical­
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmentally
sound manner at the end of its life. In this
way, environmentally friendly and resour-
ce-saving recycling is ensured.
Depending on the implementation in na-
tional law, you may have the following
options:
• Return to a shop,
•­Hand­over­to­an­official­collection­point,
• Return to the manufacturer/distributor.