General Description; Extent Of The Delivery; Overview; Functional Description - Parkside Performance Ppsbsa 20-Li A1 Originalbetriebsanleitung

GB MT
The user or operator is responsible for
accidents causing injury to other people
or damage to property.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
The device is part of the (Parkside)
X 20 V TEAM­series­and­can­be­opera-
ted­using­(Parkside)­X 20 V TEAM­series­
batteries. The batteries may only be char-
ged using chargers from the (Parkside)
X 20 V TEAM­series.

General description

An illustration of the most
important functional
components can be found on the front and
the back fold-out pages.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Cordless impact drill
- Auxiliary handle
- Storage case
- Depth stop
- Instruction manual
The rechargeable battery and
charger are not included in delivery.

Overview

1 Drill chuck aperture
2 Keyless chuck
3 Torque adjustment ring
4 Slip clutch selection switch
5 Gear selection switch
6 Rotational direction switch
7 Handle
8 Bit holder
24
9 Metal clip
10 Soft button
11 Rechargeable battery
12 Charge level indicator
13 Release button
­ 14­ LED­work­light
­ 15­ Smart­app­LED
16 On/Off switch
17 Loop
­ 18­ Butterfly­screw
­ 19­ Extension
20 Handle
21 Auxiliary handle
22 Case
23 Depth stop
24 Charger

Functional description

The cordless impact drill with two-speed
gearing has left/right running, a keyless
chuck­and­an­LED­work­light.­
The maximum torque can be preselected. To
drill, the slip clutch can simply be switched
off using the switch.
The device can be coupled with the Lidl
Home App as needed.
Please refer to the descriptions below for
information on how the operating elements
work.

Technical data

Cordless
impact drill ...........PPSBSA 20-Li A1
Motor voltage U ..........................20 V
Idling speed n
0
1st gear .............................0-550 min
2nd gear .........................0-2200 min
Impact rate ........................... 35200 bpm
Maximum torque ........................ 150 Nm
Span-chuck Ø ........................ 1.5-13 mm
Weight (with auxiliary handle) ........ 2.0 kg
-1
-1