Features Of The App - Parkside Performance Ppsbsa 20-Li A1 Originalbetriebsanleitung

GB MT
1. Slide the device base onto a Smart Per-
formance battery until it clicks into pla-
ce.­Briefly­press­the­On/Off­switch­(16)­
to activate the device.
The­smart­app­LED­
next­to­the­LED­work­light­(14)­
lights up.
2.­Enable­Bluetooth
3. Open the Lidl Home App.
From here there are options

and to connect the device.

If­this­is­the­first­device­you­want­to­con-
nect to the app:
"At home",­select­the­op-
4. On the tab
tion "Add device".
The app scans the area for available
devices and indicates if available devi-
ces have been found.
If this is not the case, read on if

possible
5. If you select „Go to add", the available
devices are displayed in a list.
6. Select the smart battery (that you are
using for the device) by setting the
check mark
. Select only one device
at a time. If there are other check marks
for other devices, clear the check marks
by pressing them.
7. Now press the
colour as the set check mark.
8.­Confirm­the­successful­connection­with­
„Finish".
The device is now listed on the tab
"At home"­and­can­be­selected.

If you have already connected other de-
vices to the app:
"At home",­select­the­
4. On the tab
in the upper right. The app scans the
area for available devices and indicates
34
(15)
® on your smartphone.
 
, ,
.
, that has the same
if available devices have been found.
If this is not the case, read on if
possible
5. Proceed as with

If a list of available devices is not
automatically suggested to you:
If the smart battery is not suggested

automatically, follow these steps:
4. On the tab
in the upper right.
5. Select „Other" in the bar on the left.
6. Select "Lidl Smart Battery".
7. Follow the instructions in the app.

If you have already connected the
smart battery to the app:
4. Select the tab
5. Select the smart battery (that you are
using for the device). The symbol
indicates that the smart battery is
connected to a Performance device.

Features of the app

Select the smart battery (that you are
using for the device). This takes you to
the overview page for the device with the
following information and settings:
If you are not immediately directed to
the overview page of the device,
select the Performance device under
"Device­information"­on­the­overview­
page of the battery.
- The tool device ID helps you identify the
exact tool
- The tool model is indicated along with
the production batch in brackets
- The Tool Discharge Current indicates the
current discharge in amperes

.

­from­point 5.
"At home",­select­the­
"At home".