Parkside Performance PPFS 1250 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 10

Maximum cutting capacity
Wood:
Aluminium/copper/
soft metal:
Metal/steel:
Pipe:
Noise emission value
The measured values have been determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
pA
Uncertainty K :
pA
Sound power level L
WA
Uncertainty K :
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Cutting boards
Front handle a :
h,B
Uncertainty K:
Rear handle a :
h,B
Uncertainty K:
Cutting wooden beams
Front handle a :
h,WB
Uncertainty K:
Rear handle a :
h,WB
Uncertainty K:
m WARNING!
Wear ear protection!
NOTE
The declared vibration total values and the
u
declared noise emission values have been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared total vibration values and the
u
declared noise emission values may also
be used for a preliminary assessment of
exposure.
8 GB
255 mm
30 mm
12 mm
130 mm
: 92.2 dB
5 dB
: 100.2 dB
5 dB
26.32 m/s
2
1.5 m/s
2
24.04 m/s
2
1.5 m/s
2
25.08 m/s
2
1.5 m/s
2
25.33 m/s
2
1.5 m/s
2
m WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of workpiece is processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when using
the tool and limiting working time. All parts
of the operating cycle must be taken into
account (e.g. times when the power tool is
switched off and when it is running idle in
addition to the trigger time).
Safety instructions
˜ General power tool
safety warnings
m WARNING!
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well
1)
lit. Cluttered or dark areas invite accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.