Selve commeo Receive Up/Down Betriebsanleitung Seite 34

Putting into operation/setting radio reception
If multiple receivers have been found, the selected receiver can be
changed by pressing the SELECT button for 1 second. The next
receiver makes a short confirmation run. Only one receiver can be
selected at one time for moving, setting and programming it.
SELECT mode
SELECT 1 s
Receiver X
SELECT 1 s
Exit SELECT mode
To exit SELECT mode (the status LED slowly flashes
orange), press the SELECT button for 3 seconds.
3 s
Status LED indicator on the transmitter for the various operating
modes
Transmitter mode
Operation mode
SELECT mode
CONFIGURATION mode,
see online supplementary
instructions
Power interruption/
programmed transmitter
SELECT 3 s
Receiver 1
Receiver 3
Status LED indicator
Lights up when a button is pressed
Slowly flashes orange
Slowly flashes green or red
34
SELECT 1 s
Receiver 2
SELECT 1 s