Selve commeo Receive Up/Down Betriebsanleitung Seite 29

Operation on commeo Receive Up/Down
Setting the receiver type
The commeo Receive Up/Down can be used for different receiver
applications (blind, awning, roller shutter). The application setting is
important if a commeo Wind Sensor (e.g. commeo Sensor WS) is
programmed in the receiver at the same time because the receiver
reacts in different ways to wind and sunlight conditions. The
commeo Receive Up/Down is set by default to "Awning".
Changing over the receiver application
Button actuation
Button TYPE
>6 seconds
Button TYPE
<1 second
Button TYPE
>3 seconds or auto-
matically after
2 minutes
Function description
for setting the receiver
type/application (awn-
ing, roller shutter, blind).
Changing over the func-
tion between the receiv-
er types/applications.
Setting is exited.
29
LED-display
The LED lights up
white with this set-
ting.
1x flashes white =
awning
2x flashes white =
roller shutter
3x flashes white =
blind
1x flashes white =
awning
2x flashes white =
roller shutter
3x flashes white =
blind
LED lights up white
after 3 seconds until
the button is
released.
EN